LA BOULANGERIE FOOD TRUCK Fails Health Inspection - Chicago Mobile food preparer

FACILITIES TO MAINTAIN PROPER TEMPERATURE - Comments: HOT HOLDING UNIT ON VEHICLE MUST BE ABLE TO MAINTAIN PROPER HOT HOLDING TEMPERATURE OF 140F OR ABOVE AT ALL TIMES.

Lack of certification indicates potential gaps in food safety knowledge, increasing risk of improper food handling and foodborne illness.

Valid City of Chicago Food Service Sanitation Certificate required and must be posted.

Certificate must be: Current and valid; Posted conspicuously in public view; Held by person in charge during all operating hours; Renewed before expiration date.

WATER SOURCE: SAFE, HOT & COLD UNDER CITY PRESSURE - Comments: INADEQUATE SUPPLY OF HOT/COLD RUNNING WATER AT 3-COMPARTMENT SINK. INSTD TO HAVE ADEQUATE SUPPLY OF HOT WATER FOR EACH BASIN OF SINK.

Contaminated water spreads waterborne diseases. Insufficient hot water prevents proper sanitization.

Potable water supply must be adequate, protected, and properly heated.

Water from approved public system; Sufficient pressure for all operations; Hot water minimum 120°F at fixtures, 180°F for high-temp dishwashers; Backflow prevention installed; No cross-connections.

FOOD IN ORIGINAL CONTAINER, PROPERLY LABELED: CUSTOMER ADVISORY POSTED AS NEEDED - Comments: PROVIDE LICENSE NUMBER ON LATERAL SIDES OF VEHICLE (2 INCHES IN HEIGHT). INSTD TO PROPERLY LABEL PRE-WRAPPED ITEMS.

Improper methods result in slow cooling that allows bacterial growth.

Approved cooling methods must be used.

Use shallow pans, ice baths, rapid chill units, ice wands; Cut large items into smaller portions; Stir frequently; Leave uncovered during cooling.

FOOD AND NON-FOOD CONTACT EQUIPMENT UTENSILS CLEAN, FREE OF ABRASIVE DETERGENTS - Comments: INTERIOR OF COOLER NEEDS DETAILED CLEANING.

Dirty equipment harbors bacteria and attracts pests.

All equipment and utensils must be clean and properly maintained.

Equipment clean to sight and touch; Free of food debris and grease; Maintained in good repair; Stored properly when clean.

WALLS, CEILINGS, ATTACHED EQUIPMENT CONSTRUCTED PER CODE: GOOD REPAIR, SURFACES CLEAN AND DUST-LESS CLEANING METHODS - Comments: REPAIR DOOR INBETWEEN DRIVER AND PREP AREA.

Damaged surfaces cannot be properly cleaned and may harbor pests.

Walls and ceilings must be smooth, cleanable, and in good repair.

Smooth, washable surfaces in food areas; Light colored; No holes or cracks; Clean and maintained.

WALLS, CEILINGS, ATTACHED EQUIPMENT CONSTRUCTED PER CODE: GOOD REPAIR, SURFACES CLEAN AND DUST-LESS CLEANING METHODS - Comments: REPAIR DOOR INBETWEEN DRIVER AND PREP AREA.

Damaged surfaces cannot be properly cleaned and may harbor pests.

Walls and ceilings must be smooth, cleanable, and in good repair.

Smooth, washable surfaces in food areas; Light colored; No holes or cracks; Clean and maintained.