WINGSTOP Gets Conditional Pass on Health Inspection - Chicago Restaurant

CITY OF CHICAGO FOOD SERVICE SANITATION CERTIFICATE - Comments: OBSERVED NO CITY OF CHICAGO FOOD SERVICE SANITATION CERTIFICATE ON PREMISES DURING INSPECTION. INSTRUCTED THAT THERE MUST BE A CERTIFIED MANAGER ON DUTY AT ALL TIMES WHILE TCS FOODS ARE BEING PREPARED AND SERVED. PRIORITY FOUNDATION VIOLATION. CITATION ISSUED. 7-38-012

Lack of certification indicates potential gaps in food safety knowledge, increasing risk of improper food handling and foodborne illness.

Valid City of Chicago Food Service Sanitation Certificate required and must be posted.

Certificate must be: Current and valid; Posted conspicuously in public view; Held by person in charge during all operating hours; Renewed before expiration date.

MANAGEMENT, FOOD EMPLOYEE AND CONDITIONAL EMPLOYEE; KNOWLEDGE, RESPONSIBILITIES AND REPORTING - Comments: OBSERVED NO EMPLOYEE HEALTH POLICY ON PREMISES DURING INSPECTION. INSTRUCTED TO HAVE SAID POLICY. PRIORITY FOUNDATION VIOLATION. NO CITATION ISSUED. 7-38-010

Ill food workers cause 70% of foodborne outbreaks. Proper reporting prevents transmission of Norovirus, Hepatitis A, Salmonella, and other serious diseases.

All food employees must understand and follow health reporting requirements and food safety responsibilities.

Employees must: Report illness symptoms and exposures; Be excluded/restricted when ill; Understand their role in preventing foodborne illness; Follow proper hygiene practices; Have signed health policy on file.

PROPER DATE MARKING AND DISPOSITION - Comments: OBSERVED READY TO EAT/TCS FOODS WITHOUT PROPER DATE MARKING AND DISPOSITION. INSTRUCTED THAT ALL TCS FOODS BEING HELD OVER 24 HOURS SHOULD HAVE PROPER DATE MARKING AND DISPOSITION DATES. PRIORITY FOUNDATION VIOLATION. NO CITATION ISSUED. 7-38-005

Inadequate reheating fails to kill bacteria that grew during storage.

Foods must be reheated to 165°F within 2 hours.

Reheat to 165°F within 2 hours; Use proper equipment (not hot holding units); Discard if not reaching temperature in time.

FOOD & NON-FOOD CONTACT SURFACES CLEANABLE, PROPERLY DESIGNED, CONSTRUCTED & USED - Comments: OBSERVED TWO GREEN CUTTING BOARDS WITH DEEP CUTS AND MARKS. INSTRUCTED TO REPLACE AND MAINTAIN

Poor design creates areas that harbor bacteria.

All surfaces must be designed to be easily cleanable.

Smooth, non-porous surfaces; Free of cracks and crevices; Easily disassembled; Accessible for cleaning.

PLUMBING INSTALLED; PROPER BACKFLOW DEVICES - Comments: OBSERVED A LEAK AT THE THREE COMPARTMENT SINK UNDER THE SANITIZE AREA OF THE THREE COMPARTMENT SINK. INSTRUCTED TO REPAIR AND MAINTAIN.

Backflow can contaminate entire water supply with sewage or chemicals.

Plumbing must be properly installed with backflow prevention.

Air gaps at fixtures; Backflow preventers on connections; No cross-connections; Annual testing of devices; Proper drainage.

PLUMBING INSTALLED; PROPER BACKFLOW DEVICES - Comments: OBSERVED WATER COMING UP THROUGH THE GREASE TRAP INTERCEPTOR FROM THE THREE COMPARTMENT SINK. INSTRUCTED TO REPAIR AND MAINTAIN.

Backflow can contaminate entire water supply with sewage or chemicals.

Plumbing must be properly installed with backflow prevention.

Air gaps at fixtures; Backflow preventers on connections; No cross-connections; Annual testing of devices; Proper drainage.

PLUMBING INSTALLED; PROPER BACKFLOW DEVICES - Comments: OBSERVED BROKEN STOPPER IN THE "RINSE" AREA OF THE THREE COMPARTMENT SINK. INSTRUCTED TO REPAIR AND MAINTAIN.

Backflow can contaminate entire water supply with sewage or chemicals.

Plumbing must be properly installed with backflow prevention.

Air gaps at fixtures; Backflow preventers on connections; No cross-connections; Annual testing of devices; Proper drainage.

PLUMBING INSTALLED; PROPER BACKFLOW DEVICES - Comments: OBSERVED BROKEN STOPPER IN THE "RINSE" AREA OF THE THREE COMPARTMENT SINK. INSTRUCTED TO REPAIR AND MAINTAIN.

Backflow can contaminate entire water supply with sewage or chemicals.

Plumbing must be properly installed with backflow prevention.

Air gaps at fixtures; Backflow preventers on connections; No cross-connections; Annual testing of devices; Proper drainage.