WENDY'S Gets Conditional Pass on Health Inspection - Chicago Restaurant

SANITIZING RINSE FOR EQUIPMENT AND UTENSILS: CLEAN, PROPER TEMPERATURE, CONCENTRATION, EXPOSURE TIME - Comments: FOUND LOW TEMPERATURE DISHMACHINE INOPERABLE. INSTRUCTED TO REPAIR. A MECHANICAL DISHWASHING MACHINES SHOULD PROVIDE A FINAL SANITIZING RINSE OF EITHER 50 ? 100 PPM CHLORINE (FOR CHEMICAL SANITIZING MACHINE) OR 180F FINAL RINSE (FOR HOT WATER SANITIZING MACHINE). MUST PROVIDE ADEQUATE SANITIZING CONCENTRATION OF 25 PPM AT 120F, 50 PPM AT 75F, 100 PPM AT 55F. TAGGED 'HELD FOR INSPECTION' INSTRUCTED NOT TO USE UNTIL REPAIRED. WHEN DISHMACHINE IS FIXED, MUST FAX A REQUEST FOR REINSPECTION FORM AT 312-746-4240 OR EMAIL FORM AT CDPHFOOD@CITYOFCHICAGO.ORG TO PROPERLY ENSURE THAT THE SAID EQUIPMENT IS REPAIRED AND THE ?HELD FOR INSPECTION? TAG CAN BE REMOVED PRIOR TO USE. NO CITATION ISSUED CRITICAL VIOLATION 7-38-030

Improper sanitization fails to kill pathogens, allowing contaminated equipment to spread illness throughout facility.

Sanitizing solutions and rinse water must meet specific requirements for effectiveness.

Chemical sanitizers: Chlorine 50-100 ppm, Quaternary ammonium 200-400 ppm, Iodine 12.5-25 ppm; Hot water: 171°F for 30 seconds or 180°F at dish surface; Test strips required; Proper contact time.

SANITIZING RINSE FOR EQUIPMENT AND UTENSILS: CLEAN, PROPER TEMPERATURE, CONCENTRATION, EXPOSURE TIME - Comments: FOUND LOW TEMPERATURE DISHMACHINE INOPERABLE. INSTRUCTED TO REPAIR. A MECHANICAL DISHWASHING MACHINES SHOULD PROVIDE A FINAL SANITIZING RINSE OF EITHER 50 ? 100 PPM CHLORINE (FOR CHEMICAL SANITIZING MACHINE) OR 180F FINAL RINSE (FOR HOT WATER SANITIZING MACHINE). MUST PROVIDE ADEQUATE SANITIZING CONCENTRATION OF 25 PPM AT 120F, 50 PPM AT 75F, 100 PPM AT 55F. TAGGED 'HELD FOR INSPECTION' INSTRUCTED NOT TO USE UNTIL REPAIRED. WHEN DISHMACHINE IS FIXED, MUST FAX A REQUEST FOR REINSPECTION FORM AT 312-746-4240 OR EMAIL FORM AT CDPHFOOD@CITYOFCHICAGO.ORG TO PROPERLY ENSURE THAT THE SAID EQUIPMENT IS REPAIRED AND THE ?HELD FOR INSPECTION? TAG CAN BE REMOVED PRIOR TO USE. NO CITATION ISSUED CRITICAL VIOLATION 7-38-030

Improper sanitization fails to kill pathogens, allowing contaminated equipment to spread illness throughout facility.

Sanitizing solutions and rinse water must meet specific requirements for effectiveness.

Chemical sanitizers: Chlorine 50-100 ppm, Quaternary ammonium 200-400 ppm, Iodine 12.5-25 ppm; Hot water: 171°F for 30 seconds or 180°F at dish surface; Test strips required; Proper contact time.