SUBWAY Gets Conditional Pass on Health Inspection - Chicago Restaurant

MANAGEMENT, FOOD EMPLOYEE AND CONDITIONAL EMPLOYEE; KNOWLEDGE, RESPONSIBILITIES AND REPORTING - Comments: OBSERVED NO EMPLOYEES HEALTH POLICY.MUST PROVIDE AND MAINTAIN.(PRIORITY FOUNDATION-7-38.010-NO CITATION ISSUED)

Ill food workers cause 70% of foodborne outbreaks. Proper reporting prevents transmission of Norovirus, Hepatitis A, Salmonella, and other serious diseases.

All food employees must understand and follow health reporting requirements and food safety responsibilities.

Employees must: Report illness symptoms and exposures; Be excluded/restricted when ill; Understand their role in preventing foodborne illness; Follow proper hygiene practices; Have signed health policy on file.

PROCEDURES FOR RESPONDING TO VOMITING AND DIARRHEAL EVENTS - Comments: OBSERVED NO CLEAN-UP OF VOMITING AND DIARRHEA PROCEDURE AND CLEAN-UP KIT ON PREMISES DURING INSPECTION. INSTRUCTED TO HAVE SAID PROCEDURE ALONG WITH REQUIRED EQUIPMENT FOR CLEAN-UP. PRIORITY FOUNDATION VIOLATION. NO CITATION ISSUED. 7-38-005

Vomit and diarrhea contain millions of viral particles. One incident can contaminate entire facility and cause outbreak affecting dozens.

Written procedures required for cleaning bodily fluid events to prevent disease transmission.

Written procedure must address: Isolating contaminated area; Removing and discarding affected food; Using proper PPE; Cleaning and sanitizing with appropriate concentration; Proper disposal of contaminated materials.

ADEQUATE HANDWASHING SINKS PROPERLY SUPPLIED AND ACCESSIBLE - Comments: MUST PROPERLY MARKED ALL HAND WASHING SINKS

Blocked or unsupplied sinks force employees to skip handwashing, spreading fecal bacteria and viruses to food.

Handwashing sinks must be accessible, properly supplied, and used only for handwashing.

Each sink needs: Warm water (100°F minimum); Soap in dispensers; Paper towels or air dryers; Waste receptacles; Signage; Clear access; Used only for handwashing.

FOOD SEPARATED AND PROTECTED - Comments: MUST KEEP DIFFERENT TYPE OF FOOD IN DIFFERENT STORAGE CONTAINERS

Improper storage allows contamination from dripping, pests, and cross-contamination between foods.

Food must be protected from contamination during storage and display.

Store 6 inches off floor; Cover all food; Separate raw from ready-to-eat; Proper storage order; Protect from overhead contamination; Use sneeze guards.

PROPER DATE MARKING AND DISPOSITION - Comments: OBSERVED READY TO EAT, TIME FOR TEMPERATURE SAFETY FOR CONTROL FOODS NOT PROPERLY DATED IN FOOD PREP COOLER AND WALK IN COOLER. INSTRUCTED TO PROVIDE PROPER DATE MARKING WITH DISPOSITION DATE FOR RTE FOODS PREPARED ON SITE AND HELD OVER 24 HOURS IN COLD HOLDING UNIT. PRIORITY FOUNDATION VIOLATION. NO CITATION ISSUED. 7-38-005

Inadequate reheating fails to kill bacteria that grew during storage.

Foods must be reheated to 165°F within 2 hours.

Reheat to 165°F within 2 hours; Use proper equipment (not hot holding units); Discard if not reaching temperature in time.

PERSONAL CLEANLINESS - Comments: MUST PROVIDE EFFECTIVE HAIR RESTRAIN WHEN WORKING WITH EXPOSED FOOD

Poor personal hygiene transfers contaminants to food.

Food handlers must maintain personal cleanliness.

Clean outer clothing; Hair restraints; Short, clean fingernails; No jewelry except plain ring; Clean hands and arms.

FOOD & NON-FOOD CONTACT SURFACES CLEANABLE, PROPERLY DESIGNED, CONSTRUCTED & USED - Comments: NOTED CARDBOARD BOXES USED TO LINE SHELVES. INSTRUCTED TO CLEAN AND REMOVE ALL CARDBOARD BOXES TO PREVENT HIDING PLACES FOR PEST

Poor design creates areas that harbor bacteria.

All surfaces must be designed to be easily cleanable.

Smooth, non-porous surfaces; Free of cracks and crevices; Easily disassembled; Accessible for cleaning.

FOOD & NON-FOOD CONTACT SURFACES CLEANABLE, PROPERLY DESIGNED, CONSTRUCTED & USED - Comments: NOTED CARDBOARD BOXES USED TO LINE SHELVES. INSTRUCTED TO CLEAN AND REMOVE ALL CARDBOARD BOXES TO PREVENT HIDING PLACES FOR PEST

Poor design creates areas that harbor bacteria.

All surfaces must be designed to be easily cleanable.

Smooth, non-porous surfaces; Free of cracks and crevices; Easily disassembled; Accessible for cleaning.