POTBELLY SANDWICH WORKS Gets Conditional Pass on Health Inspection - Chicago Restaurant

ADEQUATE HANDWASHING SINKS PROPERLY SUPPLIED AND ACCESSIBLE - Comments: NOTED NO HANDWASH SIGNAGE AT NORTH WASHROOM. INSTRUCTED TO PROVIDE AND MAINTAIN

Blocked or unsupplied sinks force employees to skip handwashing, spreading fecal bacteria and viruses to food.

Handwashing sinks must be accessible, properly supplied, and used only for handwashing.

Each sink needs: Warm water (100°F minimum); Soap in dispensers; Paper towels or air dryers; Waste receptacles; Signage; Clear access; Used only for handwashing.

PROPER DATE MARKING AND DISPOSITION - Comments: OBSERVED TCS FOODS CUT AVOCADO, ARTICHOKE, COOKED CHICKEN BREAST, SLICED TOMATOES, SLICED ONIONS, SLICED PICKLES, WITH DISCARD DATES OF 03/25/25 IN FRONT SANDWICH TOPPINGS DELI COOLER. PERSON IN CHARGE DISCARDED AND DENATURED APPROXIMATELY 10 LBS VALUED AT $33 PRIORITY VIOLATION. 7-38-005. CITATION ISSUED.

Inadequate reheating fails to kill bacteria that grew during storage.

Foods must be reheated to 165°F within 2 hours.

Reheat to 165°F within 2 hours; Use proper equipment (not hot holding units); Discard if not reaching temperature in time.

FOOD & NON-FOOD CONTACT SURFACES CLEANABLE, PROPERLY DESIGNED, CONSTRUCTED & USED - Comments: NOTED CUTTING BOARD ON SMALL DELI COOLER WITH DEEP CUTS AND STAINS, INSTRUCTED TO RESTORE TO A SMOOTH AND EASY TO CLEAN SURFACE BY DEEP CLEANING, SANDING AND SEALING OR REPLACE AND MAINTAIN.

Poor design creates areas that harbor bacteria.

All surfaces must be designed to be easily cleanable.

Smooth, non-porous surfaces; Free of cracks and crevices; Easily disassembled; Accessible for cleaning.

FOOD & NON-FOOD CONTACT SURFACES CLEANABLE, PROPERLY DESIGNED, CONSTRUCTED & USED - Comments: NOTED CUTTING BOARD ON SMALL DELI COOLER WITH DEEP CUTS AND STAINS, INSTRUCTED TO RESTORE TO A SMOOTH AND EASY TO CLEAN SURFACE BY DEEP CLEANING, SANDING AND SEALING OR REPLACE AND MAINTAIN.

Poor design creates areas that harbor bacteria.

All surfaces must be designed to be easily cleanable.

Smooth, non-porous surfaces; Free of cracks and crevices; Easily disassembled; Accessible for cleaning.