MR QUILES MEXICAN FOOD #2 Fails Health Inspection - Chicago Mobile food preparer

CITY OF CHICAGO FOOD SERVICE SANITATION CERTIFICATE - Comments: NO CITY OF CHICAGO CERTIFIED MGR ON SITE (ONLY CERTIFICATE). INSTD TO HAVE ON SITE. PRIORITY FOUNDATION 7-38-012.

Lack of certification indicates potential gaps in food safety knowledge, increasing risk of improper food handling and foodborne illness.

Valid City of Chicago Food Service Sanitation Certificate required and must be posted.

Certificate must be: Current and valid; Posted conspicuously in public view; Held by person in charge during all operating hours; Renewed before expiration date.

MANAGEMENT, FOOD EMPLOYEE AND CONDITIONAL EMPLOYEE; KNOWLEDGE, RESPONSIBILITIES AND REPORTING - Comments: NO EMPLOYEE HEALTH POLICY IN PLACE. INSTD TO PROVIDE AND MAINTAIN. PRIORITY FOUNDATION 7-38-010.

Ill food workers cause 70% of foodborne outbreaks. Proper reporting prevents transmission of Norovirus, Hepatitis A, Salmonella, and other serious diseases.

All food employees must understand and follow health reporting requirements and food safety responsibilities.

Employees must: Report illness symptoms and exposures; Be excluded/restricted when ill; Understand their role in preventing foodborne illness; Follow proper hygiene practices; Have signed health policy on file.

PROCEDURES FOR RESPONDING TO VOMITING AND DIARRHEAL EVENTS - Comments: MISSING DISINFECTANT EFFECTIVE AGAINST NOROVIRUS FOR RESPONDING TO VOMITING AND DIARRHEAL EVENTS. INSTD TO PROVIDE AND MAINTAIN ON VEHICLE. PRIORITY FOUNDATION 7-38-005.

Vomit and diarrhea contain millions of viral particles. One incident can contaminate entire facility and cause outbreak affecting dozens.

Written procedures required for cleaning bodily fluid events to prevent disease transmission.

Written procedure must address: Isolating contaminated area; Removing and discarding affected food; Using proper PPE; Cleaning and sanitizing with appropriate concentration; Proper disposal of contaminated materials.

PROPER COLD HOLDING TEMPERATURES - Comments: THE FOLLOWING TCS FOODS AT IMPROPER COLD HOLDING TEMPERATURES IN PREP COOLER: LARGE CONTAINER OF CHICKEN 48.1F AND 3 LARGE BAGS OF CHEESE AT 47.9. ALL FOOD DISCARDED AND DENATURED AT THIS TIME. APPROX 20LBS. $100 VALUE. CITATION ISSUED PRIORITY 7-38-005.

Temperatures below 135°F allow bacteria to multiply, especially spore-formers that survive cooking.

Hot foods must be held at 135°F or above.

Maintain 135°F or above; Check temperatures regularly; Proper hot holding equipment; Cannot reheat in hot holding units.

PROPER COOLING METHODS USED; ADEQUATE EQUIPMENT FOR TEMPERATURE CONTROL - Comments: PREP COOLER IN USE UNABLE TO MAINTAIN PROPER TEMPERATURE, INTERNAL AIR TEMPERATURE OF 48F. INSTD TO BE ABLE TO REPAIR AND MAINTAIN AT 41F OR BELOW AT ALL TIMES. PRIORITY VIOLATION 7-38-005 CITATION ISSUED.

Dirty equipment harbors bacteria and attracts pests.

All equipment and utensils must be clean and properly maintained.

Equipment clean to sight and touch; Free of food debris and grease; Maintained in good repair; Stored properly when clean.

INSECTS, RODENTS, & ANIMALS NOT PRESENT - Comments: NO SCREEN ON REAR DOUBLE DOOR. INSTD TO PROVID PROPER SCREEN AT REAR DOORS.

Pests spread numerous diseases through contamination.

No pests or animals allowed in facility.

No evidence of pests; No live animals except service animals; Effective pest control program.

FOOD & NON-FOOD CONTACT SURFACES CLEANABLE, PROPERLY DESIGNED, CONSTRUCTED & USED - Comments: CUTTING BOARD WITH DEEP, DARK GROOVES. INSTD TO REPLACE AND MAINTAIN CUTTING BOARDS AT ALL TIMES.

Poor design creates areas that harbor bacteria.

All surfaces must be designed to be easily cleanable.

Smooth, non-porous surfaces; Free of cracks and crevices; Easily disassembled; Accessible for cleaning.

FOOD & NON-FOOD CONTACT SURFACES CLEANABLE, PROPERLY DESIGNED, CONSTRUCTED & USED - Comments: CUTTING BOARD WITH DEEP, DARK GROOVES. INSTD TO REPLACE AND MAINTAIN CUTTING BOARDS AT ALL TIMES.

Poor design creates areas that harbor bacteria.

All surfaces must be designed to be easily cleanable.

Smooth, non-porous surfaces; Free of cracks and crevices; Easily disassembled; Accessible for cleaning.