LINKEDIN CORPORATION Fails Health Inspection - Chicago Restaurant

ADEQUATE HANDWASHING SINKS PROPERLY SUPPLIED AND ACCESSIBLE - Comments: FOUND THE FOLLOWING HANDWASHING SINKS WATER TEMPERATURE RANGE FROM 77- 86F: UNISEX 1 STALL TOILETROOM AND 2ND FLOOR PANTRY. INSTRUCTED MANAGER TO PROVIDE A MINNIMUM HOT WATER TEMPERATURE OF 100F AT ALL TIMES. PRIORITY VIOLATION. 7-38-030(C). CITATION ISSUED.

Blocked or unsupplied sinks force employees to skip handwashing, spreading fecal bacteria and viruses to food.

Handwashing sinks must be accessible, properly supplied, and used only for handwashing.

Each sink needs: Warm water (100°F minimum); Soap in dispensers; Paper towels or air dryers; Waste receptacles; Signage; Clear access; Used only for handwashing.

FOOD-CONTACT SURFACES: CLEANED & SANITIZED - Comments: FOUND AN EXCESSIVE AMOUNT OF BLACK MOLD LIKE SUBSTANCE THROUGHOUT INTERIOR OF ICE MACHINE. ICE IS USED FOR HUMAN CONSUMPTION. MUST CLEAN SANITIZE AND MAINTAIN. PRIORITY FOUNDATION VIOLATION. 7-38-005. CITATION ISSUED.

Dirty equipment harbors and spreads pathogens, causing cross-contamination and illness.

All food contact surfaces must be properly cleaned and sanitized.

Wash, rinse, sanitize after each use; Clean between different raw foods; Every 4 hours for continuous use; When contaminated; Proper procedures and chemicals.

FOOD-CONTACT SURFACES: CLEANED & SANITIZED - Comments: FOUND HIGH TEMPERATURE DISH MACHINE INADEQUATELY SANITIZING DISHES AT TIME OF INSPECTION. FOUND HIGH TEMP DISH MACHINE FINAL RINSE AT 126F. INSTRUCTED MANAGER TO PROVIDE A MINNIMUM FINAL RISE AT 180F AND A CONTACT SURFACE TEMPERATURE AT 160F. HIGH TEMPERATURE DISH MACHINE TAGGED AND HELD FOR INSPECTION BY THE CHICAGO DEPARTMENT OF PUBLIC HEALTH AND MAY NOT BE USED UNTIL HIGH TEMPERATURE DISH MACHINE IS RE-INSPECTED BY CDPH. PRIORITY VIOLATION. 7-38-025.CITATION ISSUED. INSTRUCTED MANAGER TO USE 3 COMP SINK TO WASH, RINSE AND SANITIZE DISHES.

Dirty equipment harbors and spreads pathogens, causing cross-contamination and illness.

All food contact surfaces must be properly cleaned and sanitized.

Wash, rinse, sanitize after each use; Clean between different raw foods; Every 4 hours for continuous use; When contaminated; Proper procedures and chemicals.

PROPER COLD HOLDING TEMPERATURES - Comments: FOUND IMPROPER COLD HOLDING FOR THE FOLLOWING TIME/TEMPERATURE CONTROL FOR SAFETY FOODS: CHICKEN, TURKEY WRAPS AND EGGS. FOUND TEMPERATURES RANGING FROM 58F - 47F. INSTRUCTED MANAGER TO DISCARD AND DENATURE ALL FOOD ITEMS. INSTRUCTED MANAGER TO PROVIDE A MINNIMUM COLD HOLDING TEMPERATURE OD 41F AT ALL TIMES. PRIORITY VIOLATION.7-38-005. CITATION ISSUED.

Temperatures below 135°F allow bacteria to multiply, especially spore-formers that survive cooking.

Hot foods must be held at 135°F or above.

Maintain 135°F or above; Check temperatures regularly; Proper hot holding equipment; Cannot reheat in hot holding units.

FOOD PROPERLY LABELED; ORIGINAL CONTAINER - Comments: FOUND BULK FOOD CONTAINERS WITHOUT LABELLING (COMMON NAME)INSTRUCTED MANAGER TO PROVIDE.

Missing allergen labeling can cause severe allergic reactions.

All food properly labeled with required information.

Common name; Ingredients; Allergen declarations; Date marking; Manufacturer info; Net quantity.

WAREWASHING FACILITIES: INSTALLED, MAINTAINED & USED; TEST STRIPS - Comments: FOUND NO TEMPERATURE MEASURING DEVICE FOR HIGH TEMPERATURE DISH MACHINE. IN HOT WATER MECHANICAL WAREWASHING OPERATIONS, AN IRREVERSIBLE REGISTERING TEMPERATURE INDICATOR SHALL BE PROVIDED AND READILY ACCESSIBLE FOR MEASURING THE UTENSIL SURFACE TEMPERATURE. PRIORITY FOUNDATION VIOLATION.7-38-005. CITATION ISSUED.

Cannot verify sanitization without test strips, risking contaminated equipment.

Warewashing facilities must be properly equipped and supplied.

3-compartment sink or dishwasher; Test strips for sanitizer; Thermometers for water temperature; Adequate drainboards; Proper detergents.

WAREWASHING FACILITIES: INSTALLED, MAINTAINED & USED; TEST STRIPS - Comments: FOUND NO TEMPERATURE MEASURING DEVICE FOR HIGH TEMPERATURE DISH MACHINE. IN HOT WATER MECHANICAL WAREWASHING OPERATIONS, AN IRREVERSIBLE REGISTERING TEMPERATURE INDICATOR SHALL BE PROVIDED AND READILY ACCESSIBLE FOR MEASURING THE UTENSIL SURFACE TEMPERATURE. PRIORITY FOUNDATION VIOLATION.7-38-005. CITATION ISSUED.

Cannot verify sanitization without test strips, risking contaminated equipment.

Warewashing facilities must be properly equipped and supplied.

3-compartment sink or dishwasher; Test strips for sanitizer; Thermometers for water temperature; Adequate drainboards; Proper detergents.