HIGH DIVE Gets Conditional Pass on Health Inspection - Chicago Restaurant

SOURCE OF CROSS CONTAMINATION CONTROLLED I.E. CUTTING BOARDS, FOOD HANDLERS, UTENSILS, ETC - Comments: All food shall be protected from contamination and the elements, and so shall all food equipment, containers, utensils, food contact surfaces and devices, and vehicles.LARGE AMOUNTS OF MOLD INSIDE ICE MACHINE//TAGGED HELD FOR INSPECTION.MUST CLEAN,SANITIZE SAID FOOD EQUIPMENTS IN DETAIL.MUST NOTIFY THE CDPH 312-746-4240 WHEN READY,TAG REMOVAL

These activities introduce saliva and contaminants into food areas, potentially spreading bacteria and viruses to customers.

Food employees must not eat, drink, or use tobacco in food preparation areas.

Eating, drinking, tobacco use only in designated areas; Closed beverage containers with straw allowed in some areas; Proper tasting using clean utensil each time; No personal items in food prep areas.

SANITIZING RINSE FOR EQUIPMENT AND UTENSILS: CLEAN, PROPER TEMPERATURE, CONCENTRATION, EXPOSURE TIME - Comments: Equipment and utensils should get proper exposure to the sanitizing solution during the rinse cycle. Bactericidal treatment shall consist of exposure of all dish and utensil surfaces to a rinse of clean water at a temperature of not less than 180F.FOUND LOW TEMPERATURE DISHMACHINE IN KITCHEN IN USE NOT DISPENSING SANITIZER AS REQUIRED ( "0" PPM)DURING THIS INSPECTION.TAGGED HELD FOR INSPECTION-MUST NOT USE UNTIL THE CDPH IS NOTIFIED VIA FAX 312-0746-4240 WHEN SERVICED,TAG REMOVAL.

Improper sanitization fails to kill pathogens, allowing contaminated equipment to spread illness throughout facility.

Sanitizing solutions and rinse water must meet specific requirements for effectiveness.

Chemical sanitizers: Chlorine 50-100 ppm, Quaternary ammonium 200-400 ppm, Iodine 12.5-25 ppm; Hot water: 171°F for 30 seconds or 180°F at dish surface; Test strips required; Proper contact time.

FOOD AND NON-FOOD CONTACT SURFACES PROPERLY DESIGNED, CONSTRUCTED AND MAINTAINED - Comments: All food and non-food contact equipment and utensils shall be smooth, easily cleanable, and durable, and shall be in good repair.MUST PROVIDE MISSING SINK STOPPERS FOR 3 COMP SINK,REPLACE WORNED OUT CUTTING BOARDS IN KITCHEN.

Unapproved processes may lack critical safety controls.

Variance required before conducting specialized food processes.

Submit application to CDPH; Include HACCP plan; Await approval before starting; Maintain all required records.

FOOD AND NON-FOOD CONTACT EQUIPMENT UTENSILS CLEAN, FREE OF ABRASIVE DETERGENTS - Comments: All food and non-food contact surfaces of equipment and all food storage utensils shall be thoroughly cleaned and sanitized daily.Clean and degrease the equipment and surfaces in detail.

Dirty equipment harbors bacteria and attracts pests.

All equipment and utensils must be clean and properly maintained.

Equipment clean to sight and touch; Free of food debris and grease; Maintained in good repair; Stored properly when clean.

FLOORS: CONSTRUCTED PER CODE, CLEANED, GOOD REPAIR, COVING INSTALLED, DUST-LESS CLEANING METHODS USED - Comments: The floors shall be constructed per code, be smooth and easily cleaned, and be kept clean and in good repair.FLOORS BENEATH COOKING EQUIPMENTS ARE DIRTY,CLEAN THE FLOORS IN DETAIL.

Damaged floors harbor bacteria and create safety hazards.

Floors must be smooth, cleanable, and maintained.

Smooth, non-porous in food areas; Properly sloped to drains; Coving at wall junctures; Kept clean; Good repair.

WALLS, CEILINGS, ATTACHED EQUIPMENT CONSTRUCTED PER CODE: GOOD REPAIR, SURFACES CLEAN AND DUST-LESS CLEANING METHODS - Comments: The walls and ceilings shall be in good repair and easily cleaned.MUST REPLACE BROKEN CEILING TILES IN KITCHEN AREAS,SEAL OPENINGS ON WALLS IN BASEMENT,WALL BEHIND DRY STORAGE MUST BE SMOOTH,EASILY CLEANABLE SURFACE SAME AREA.

Damaged surfaces cannot be properly cleaned and may harbor pests.

Walls and ceilings must be smooth, cleanable, and in good repair.

Smooth, washable surfaces in food areas; Light colored; No holes or cracks; Clean and maintained.

WALLS, CEILINGS, ATTACHED EQUIPMENT CONSTRUCTED PER CODE: GOOD REPAIR, SURFACES CLEAN AND DUST-LESS CLEANING METHODS - Comments: The walls and ceilings shall be in good repair and easily cleaned.MUST REPLACE BROKEN CEILING TILES IN KITCHEN AREAS,SEAL OPENINGS ON WALLS IN BASEMENT,WALL BEHIND DRY STORAGE MUST BE SMOOTH,EASILY CLEANABLE SURFACE SAME AREA.

Damaged surfaces cannot be properly cleaned and may harbor pests.

Walls and ceilings must be smooth, cleanable, and in good repair.

Smooth, washable surfaces in food areas; Light colored; No holes or cracks; Clean and maintained.